How to improve your cold storage with mobile racking solutions …and save money! Redesign your freezer warehouse and keep your lift trucks inside

By Bob Jane, Sales Manager Dynamics Systems , SSI Schaefer

Pallet-Conveyor

Today’s freezer warehouses typically use large ‘barn-size’ doors equipped with plastic strip curtains to reduce cross-contamination of warm air entering the freezer. However, the constant movement of lift trucks actually creates the opposite result – heat and temperature variation – it is much more expensive to cool air than it is to heat air.

Also did you know that the primary cause of lift truck equipment failure is condensation caused by the constant in-and-out movement of product by lift trucks operating between -28 degrees Celsius and ambient air temperature within loading docks?  Extreme temperature swings cause moisture to form, often resulting in the failure of electronics, electro-mechanical components and wiring.

The only solution preventing condensation in freezer warehousing is to keep lift trucks inside the freezer which is why many now have heated cabs. These lift trucks never leave the freezer warehouse, allowing operators to be both warm and productive during an entire shift. What’s more by automating freezer warehouses and keeping your lift trucks inside the freezer it can reduce your energy consumption by as much as 80%, and reduce labour costs by as much as 70%.

schaefer-logoSo, if fork lift trucks never leave the cold store, how are your pallets stored, picked and shipped? The solution is pallet conveyor technology with in-bound and out-bound spurs. Whether unloading a trailer or moving pallets from a production area into a freezer warehouse, pallets can be placed onto a conveyor outside the freezer entering via high-speed compartment doors – the doors are then sealed quickly to minimise warmer exterior air entering the cold store.

Once the pallets enter the freezer warehouse they travel on conveyor to the pick-up point. The lift truck then picks the pallet at the end of the conveyor line for put-away, resulting in reduced travel time due to much shorter distances between pick-up and storage locations.

High-Bay-pallet-craneThe added advantage to using conveyor technology is a considerable reduction in labour costs because the same throughput can be accomplished with fewer operators. What’s more, lift truck wear-and-tear is significantly reduced by shorter travel distances. Outbound picking – in which pallets are placed on an outbound conveyor – also results in much shorter travel distances, less lift truck use, less wasted time: lower costs.

To further improve your cold store design you must introduce better storage technology, more specifically a high-density storage system. A typical cold store utilises selective pallet racking technology with aisle widths of up to four metres. With any freezer warehouse storage system having aisles for lift-trucks to manoeuvre and turn-around, a very important question should be asked: “what are we really freezing?” The answer is air and aisles.

With the cost of energy, property and labour constantly increasing, freezer warehouse owners should look at new technologies such as High-rise Automated Storage and Retrieval Systems, or better yet, Mobile Pallet Racking, which uniquely addresses building and warehouse heights under 15 metres.

Mobile Racking uses conventional selective pallet racks mounted on carriages and moving on running rails and guide rails embedded directly into concrete floor. Since energy expenses in a freezer warehouse are second only to labour costs, it makes sense to double the amount of pallet locations inside the building or reduce the initial building size. This gets back to the question: do you want to freeze product or freeze aisles? Doubling the amount of pallet positions can reduce the total cost per pallet position by as much as 40% in new construction projects, and can reduce utility bills by as much as 50%.

What if you don’t need more pallet storage locations? High-density storage solutions such as Mobile Racking result in a much smaller building footprint by up to 45%. A significant reduction in energy loss (and utility bills) also follows, due to the correspondingly-smaller roof structure reducing air escape. The other cost savings of a smaller, more efficient Mobile Racking warehouse include a 35% lower overall investment in construction costs and a reduction of up to 49% in utility costs.

Mobile-Racking

Mobile Racking is a pragmatic, smart, state-of the-art solution for freezer warehousing and can make you significant savings in labour, energy efficiency, construction costs, maintenance etc. SSI Schaefer is the UK and world’s leading supplier of logistics and material flow systems.  Our unrivalled in-house expertise in the design and installation of major – and often bespoke – turnkey materials handling and storage projects has resulted in many successful automated picking and high bay warehousing schemes for leading blue-chip companies and international organisations.

We have developed a unique partnering approach, working closely with our customers to develop, design and implement the most innovative yet cost-effective solution for each project. SSI Schaefer prides itself on going the extra mile to fulfil and deliver the best solutions.

SSI Schaefer

Tel: 01264 386600

Email: solutions@ssi-schaefer.co.uk

www.ssi-schaefer.co.uk